Behringer System 100 Bundle

Bundle offer comprising

Behringer 112 Dual VCO

  • Eurorack Module
  • Contains two identical analogue VCOs
  • Waveforms: triangle, sawtooth and square/pulse
  • Adjustable pulse width and PWM CV input with attenuator
  • Octave selector and fine-tune control
  • Hard- and soft-sync
  • 3 Pitch CV inputs with attenuators
  • Current consumption: 130 mA (+12 V) / 70 mA (-12 V)
  • Width: 16 HP
  • Depth: 46 mm

Behringer 140 Dual Envelope/LFO

  • Eurorack Module
  • Two independent analogue ADSR envelopes
  • For each envelope: manual trigger button, gate input, fader for attack, decay, sustain and release
  • 2 Signal outputs and inverted output
  • Analogue LFO with 5 waveforms
  • Fader for frequency and delay time
  • Three frequency ranges selectable (0.05 - 30Hz)
  • CV and trigger input and 2 signal outputs
  • Current consumption: 40mA (+12V) / 40mA (-12V)
  • Width: 16 HP
  • Depth: 44 mm

Behringer 121 Dual VCF

  • Eurorack Module
  • Authentic reproduction of the original "System 100M" circuitry
  • 2 Low-pass filters with cut-off frequency and resonance control
  • Each filter has 3 audio outputs and 3 CV inputs with attenuators
  • Each VCF has an additional switchable 3-mode high-pass filter
  • 3-Channel mixer per VCF allows independent mixing of all input signals
  • Current requirement: 40 mA +12 V, 40 mA -12 V
  • Width: 16 HP

Behringer Eurorack 104

  • Eurorack empty housing
  • Compact empty housing for synthesizer modules and accessories in a 3 U format
  • Sturdy aluminium frame with wooden side walls
  • Width: 104 HP
  • maximum depth: 38 mm (1.5")
  • Easy positioning of modules using 52 sliding nuts (included)
  • Large rubber feet are secure and non-sliping on most surfaces
  • Dimensions (W x H x D): 546 x 84 x 133 mm
  • Weight: 1.2 kg
  • Design and development in the UK

Behringer 130 Dual VCA

  • Eurorack Module
  • Analogue 2-channel VCA
  • Per channel: Mixer with 3 adjustable inputs, 3 CV inputs with attenuator, gain control, 2 signal outputs (low/high) and switch between linear and exponential characteristics
  • Current consumption: 30mA (+12V) / 20mA (-12V)
  • Width: 16 HP

Behringer CP1A

  • Power supply module for Eurorack systems
  • Control LEDs for +12 V, -12 V and +5 V.
  • Slots for 2 Flying Bus Boards with 7 slots each
  • Output: 1 A (+12 V) / 1 A (-12 V) / 0.5 A (+5 V)
  • Width: 4 HP
  • Depth: 52mm
  • Includes external power supply unit (13 V DC, 3 A), 2 Flying Bus Boards with 7 slots each

Behringer 150 Ring Mod/Noise/S&H/LFO

  • Eurorack Module
  • Analogue ring modulator
  • Noise generator with two outputs for white noise and pink noise
  • Sample & hold unit with clock out, external clock in and fader for clock rate and lag time
  • Analogue LFO with 5 waveforms
  • Fader for frequency and delay time
  • Three frequency ranges selectable (0.03 - 30Hz)
  • CV and trigger input and 2 signal outputs
  • Current consumption: 60mA (+12V) / 50mA (-12V)
  • Width: 16 HP
  • Depth: 44 mm

2x the sssnake DD1030

  • Patch Cable Set
  • Mini jack mono to Mini jack mono
  • Length: 30 cm
  • Set of 6 cables
Available since July 2020
Item number 499654
Sales Unit 1 piece(s)
7.333 kr
Free shipping incl. VAT
In stock within about one week
In stock within about one week

This product is expected back in stock soon and can then be shipped immediately.

Standard Delivery Times
1